OS X VM SLEEPIMAGE INSTALL
OS X VM SLEEPIMAGE MOD

There is no longer any need to use the ssdtPRgen.sh script.Р”В«e aware that hibernation (suspend to disk or S4 sleep) is not well supported on hackintosh. Power ManagementР”В®verything required for CPU/IGPU power management is already installed with the steps above. Devices->Onboard Devices, enable SD Card to Read/Write as we desoldered/replaced with a BCM94360CS2(or BCM942602CS).

Devices->Onboard Devices, disable WLAN and Bluetooth.

OS X VM SLEEPIMAGE MOD

The following settings are important for Mod users

Boot->Boot Priority->Legacy Boot Priority, enable 'Legacy Boot' (continue to boot UEFI, but enable legacy for CSM).

Boot->Secure Boot, 'Secure Boot' is disabled.

Devices->Video, 'IGD Aperture Size' set to 256mb.

Devices->Video, 'IGD Minimum Memory' set to 64mb or 128mb.

These settings are important but are already set as needed by 'Load Defaults'

Power->Secondary Power Settings, 'Wake on LAN from S4/S5', set to 'Stay Off'.

Boot->Boot Configuration, disable 'Network Boot'.

To start, choose 'Load Defaults' (choose from the menu or press F9 in the BIOS setup). That gets you to the main BIOS setup screens. After the main screen comes up choose 'Advanced'. The boot menu and BIOS setup can be accessed by mashing the F2 key during BIOS startup. On my NUC8i7BEH, BIOS version updated from 0078 to 0081 NUC8i7BEH uses RTS5227S (use pcie x1) chipset for SD card which can be desoldered/replaced with a BCM94360CS2(or BCM942602CS) to get native AirDrop/Handoff support.

BCM94360CS2 Wi-Fi/Bluetooth with adapter (will explain how).

2 * Hynix HMA81GS6AFR8N-UH 8GB DDR4-2400 SODIMM.

1 * M.2 connector (key type M and B+M) for 22 modules.

1 * HDMI 2.0a (MegaChips MCDP2800 LSPCon DisplayPort1.2-to-HDMI 2.0 up to ).1 * Thunderbolt 3 Four lanes 40Gbps, support DisplayPort 1.2 (17Gbps, up to ), support USB data (10Gbps).Wi-Fi/BT: Intel Dual Band Wireless-AC 9560 (soldered).LAN: Intel I219V Gigabit Ethernet Controller (10/100/1000 Mbps).RAM: Two sockets 260-pin 1.2 V DDR4 SDRAM SO-DIMM (up to 32Gb, and 2400Mhz).Graphic: intel Iris plus 655 with 128 eDRAM.

OS X VM SLEEPIMAGE INSTALL

Once you install Catalina Update, the system will reboot twice, make sure select Boot macOS Install from your_volume_name - Data volume manually every time, once the update is finished, the Boot macOS Install from your_volume_name - Data volume will be no longer showing at Clover boot screen. This repository contains the files and scripts to install macOS on a modded Intel NUC8i7BEH (Bean Canyon).

Os x vm sleepimage